Maybe that'll fix it

Increased the temperature by 5C and lowered the print speed by 5. For the PCTG.

I was able to mostly print a temp tower, no layer separation at 255C and 260C at least, it failed big time under 250C, don’t recommend trying to print it under 250C. If you use the highest temperature, maybe you can print faster. I’m printing way slower then what they advertise. Not sure I can print that fast with this filament. My printer is nice and slow, and steady.

And the z offset was probably a little too close. I should clean the nozzle, but I’m lazy. Maybe clean out the nozzle too with the clogging thing. Might have gotten slightly clogged, it did mess up big time printing the temp tower under 250C. Just set temp tower to 250C to 270C, or better print at the highest you can and are willing to. No idea if I can print @ 270C. But then I have to mess with speed, probably increase it, if I increase the temp that much.

Nope, still looks like crap, canceled it. It printed a temp tower better, oddly. Maybe print @ 260C. If filament needs to be dried, why did the temp tower mostly work?